Applied Robotics, Solutions in Reach

Applied Robotics: QS-25 Collision Sensors for Automotive Applications

QS-25 Collision Sensor

The QS-25 is a dynamically variable collision sensor that operates on an air pressure system.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.

Key Benefits

  • Dynamically variable trip points
  • Permanent repeatability
  • Use on linear actuators, robots, pick-and-place robotics machines
  • Detects angular, rotational and compressive forces
Hotels Additional Product Info

Engineering Data

 

QS-25 Collision Sensor
Performance Metric Imperial
Torque Trip Point 1.0-6.4 N-m 9-56 in-lb
Moment Trip Point 1.0-6.4 N-m 9-56 in-lb
Mass 0.26 kg 0.56 lb
Diameter 63.5 mm 2.5 in
Profile 32 mm 1.26 in
Compliance Angle ±5°
Axial Compliance (Z+) 3.4 mm 0.134 in
Rotary Compliance no limit
Center of Mass 18.6 mm .73 in
Operating Temperature 0°C min - 70°C max
Repeatability X&Y: ±0.013 mm
Z: ±0.013 mm
Rotational: ±0.024°
Avg. Response Time 2-6 ms
Switch High reliability aircraft snap acting type. Rated 3 amps, 
Average cycle life - 7 million cycles
Dust Protection Foam collar supplied
Options Coolant Resistant Boot
UL Rating 42.4 VDC max.
3 amps max.

Additional Product Info

Please log in if you're an existing user or register now.

PartStream Modeling Tool

PDF Format Datasheet

PDF Format User Guide


Don't see what you're looking for? Contact engineering@arobotics.com.

Accessories

Product Adaptor Plates Product Adaptor Plates

Cabling Cabling

Links

Link Related Disk Drive Solution
Back to Top
To learn more about Applied Robotics call 518 384 1000 or visit www.arobotics.com.